When You Suspect a Problem

43

Troubleshooting

When You Suspect a Problem

First, check the indicators on the projector. There are two indicators on the projector unit which notify you of projector conditions.

Power indicator

Warning indicator

Power indicator

lit flashing

• If the indicator is not lit, the power supply is not on.

 

 

 

 

Condition

Cause/Remedy

s

Orange

Standby state

 

 

The power cable should only be disconnected when the projector is in this state.

P.22

 

Press the [Power] button to start projection.

 

 

 

 

Orange

Cool-down in progress

 

 

• Please wait. The cool-down period lasts about 20 seconds.

P.22

 

 

•You cannot operate the [Power] button during the cool-down period. Press the power button again after cool-down has finished.

Green

Projection in progress

P.22

 

 

 

 

 

Green

Warming-up

 

 

Please wait. Warming up takes about 35 seconds (the EPSON logo appears after approximately 6 seconds). When warming P.22

 

up is complete, the indicator changes to steady green.