Selecting the Input Source

28

Selecting the Input Source

Remote control

When a device is connected, projection commences automatically without having to select the input source, however when connected to two or more devices, you need to switch between the input sources.

Projector

Computer/

Computer

Component video

 

S-Video

Component Video

Video

Component Video

 

The input source switches between Computer and Component video whenever the [Computer] button is pressed, as shown above.

The input source changes each time [Source] is pressed.

The items selected using the “Input signal” command in the “Image” menu are displayed. See “Image menu” on page 36.

S-Video

Video

The input source switches between S-Video and Video whenever the [S-Video/Video] button is pressed, as shown above.

p If two or more sources are connected, be sure to swap the audio cables between the connected equipment, when necessary.