Part Names and Functions

Rear

Computer/Component Video port s P. 14, P. 20

Inputs analog video signals from a computer and Component Videog signals from other video sources.

Video port s P. 20

Inputs Composite Videog signals to

the projector.

Connect using an A/V cable.

S-Video port s P. 20

Inputs S-Videogsignals to the projector.

Connect using an S-Video cable.

Audio port s P. 15, P. 21 Inputs audio signals to the projector.

Connect using an A/V cable, or a stereo RCA cable.

When using computer and video equipment alternately, swap the cable or use an audio switch.

Control (RS-232C) port s P. 63

Connects the projector to a computer using an RS-232C cable. This port is for control use and should not be used by the customer.

8

Monitor Out port s P. 16 Outputs the projected analog computer signal to an external monitor. This feature is not available for video signals.

remote control holder s P. 11 Store the remote control in here when not in use.

power inlet s P. 22 Connects the power cable.

security lock s P. 62

remote control infrared receiver s P. 11

Receives signals from the remote control.