Epson S1 Vertical stripes appear in the image, Image is distorted / Image contains interference

When You Suspect a Problem

48

Vertical stripes appear in the image

• Has the “Trackingg” setting been adjusted?

Set the tracking value until the vertical stripes disappear. ([Menu] button → “Image”→ “Picture Quality”→ “Tracking”) See“Image menu” on page 36.

Image is distorted / Image contains interference

• Have the “Sync.g,” “Trackingg” and “Position”	If the configuration menu “Image”→	“Auto Setup” setting has been set to “OFF,”
settings been adjusted correctly?	press the [Auto] button on the remote control to adjust these settings. If the
	images have not been correctly adjusted after pressing the [Auto] button and
	using the automatic setup function, adjust the settings manually in their
	respective menus. ([Menu] button →	“Image”→ “Picture Quality”→ “Sync.”) See
	“Image menu” on page 36.
• Are the image signal format settings correct?	• When a computer or Component Videog device is connected, select the
	appropriate setting for the input source you are using, in the “Image”→ “Input
	Signal” configuration menu.
	• When a Composite Videog or S-Videogdevice is connected, select the
	appropriate setting for the video system you are using in the “Setting”→
	“Video Signal” configuration menu.
• Has the correct resolution been selected?	Set the computer so that the signals that are output are compatible with this
	projector. Refer to your computer’s documentation for further details. See
	“Supported Display Resolutions” on page 64.
• Is an extension cable being used?	If using an extension cable, electrical interference may affect the signals. Confirm
	that you are using a shielded cable.
• Are the cables connected correctly?	See “Connecting to a Computer” on page 14, "Connecting to Video Equipment"
	P.20.