
Adjusting the Display
Adjusting the projection angle
1Set up the projector so that it is at right angles to the screen.
Seen from the side
26
2Raise the front of the projector while pressing the buttons on both sides.
3Extend the front feet and release the buttons when the projector is adjusted to the desired height.
Center of lens
Seen from above
If it is not possible to set up the projector so that it is at right angles to the screen, it can be set up at a slight vertical angle instead. (Max 10°)
p | • The height can be adjusted by turning the base of the front feet on |
either side. |
•Press the front buttons on both sides and slowly lower the projector down to return to its normal position.