Configuration Menus

38

Sub menu

 

Function

 

 

 

 

 

Picture

Sync.g

Adjusts the image when flickering, fuzziness or interference occur in the image.

Quality

(Computer images

Flickering and fuzziness may also occur when the brightness, contrast, sharpness or keystone correction

 

 

only)

settings are adjusted.

 

 

Best results can be obtained by adjusting the tracking before the sync.

 

 

 

 

 

Color Temperatureg

Adjusts bright colors from a reddish tinge to a bluish tinge.

 

 

Lower color temperature settings produce redder colors and softer color tones.

 

 

Higher color temperature settings produce bluer colors and sharper color tones.

 

 

Press the [e] button and make a setting from the color adjustment menu which is displayed.

 

 

 

 

 

Saturation

Adjusts the color depth

 

(Video images only)

 

 

 

 

 

 

 

Tint

(Adjustment is only possible when Component Videog or NTSC signals are being input)

 

(Video images only)

Adjusts the tint of the image.

 

 

 

 

Auto Setup

 

ON: When the input source is switched to a computer signal, the projector automatically adjusts the image

(Computer images only)

to its optimal state.

 

 

 

 

OFF: Auto Setup is disabled.

 

 

 

 

Input Signal

 

Select the type of image signal connected to the Computer/Component Video port.

(Computer/component

Computer: computer images

video images only)

Component Video (YCbCr): DVD images

 

 

 

 

Component Video (YPbPr): HDTV images

 

 

 

 

Reset

 

Resets all the adjustment values within the “Image”menu (except for “Input Signal”) to their default settings.

 

 

Press the [e] button and select “Yes” on the confirmation screen which is displayed.

 

 

Select “All Reset” to restore all menu settings, such as image and sound, to their default settings. See

 

 

“Reset menu” on page 42.