Connecting Two of More Monitors to One Video Controller

Using the monitor’s BNC connectors, you can connect two or more monitors to a single video controller for demonstrations and other applications. To connect two or more monitors to one video controller, you need the following:

#-I One video interface cable with a VGA connector on one end

and five color-coded cables with BNC connectors on the other

il Five 732 video interface cables with BNC connectors on both ends and five T-BNC connectors (called T connectors here) for each additional monitor.

These cables and connectors are available at computer and electronics stores. For best results, make sure the video interface cables for connecting the monitors to each other are the same length and impedance. Also, avoid using very long cables because this may affect the quality of the images displayed on the additional monitor(s).

Note

It is best to connect no more than three monitors to one video controller. If you connect more than three monitors, the image may deteriorate slightly on each additional monitor you connect.

75 Q video Interface cable with

video interface cable with one

one BNC connector on each end

VGA and five BNC connectors

T connector

10Professional Series II Monitor