6.When you are finished adjusting the image, press MEM SEL. The LCD displays Mem Select : nt, where n is the number of the current video mode. (If you do not want to save your changes to the current video mode, press

MEM SEL again. The LCD displays the number of the current video mode.)

7.To save your setting(s), press MEM STORE. The LCD displays the number of the current video mode. (If you modified a factory-set video mode and you want to restore the factory settings, see the next section.)

Note

You cannot store the same display information for two different factory-set video modes.

Recalling a Factory-set Video Mode

When the monitor is using a factory-set video mode you modified, you can recall the original settings for the mode. When the LCD displays a factory-set video mode number (1 through 14), follow the steps in this section to restore its factory settings. (If the LCD is off, press the Brightness or Contrast button to turn it back on.)

Note

You can recall the original settings only for factory-set video modes. If you press MEM RCL when the LCD displays a user-defined video mode number (15 through 22) or Mode not found, you see the message Rcl unavailable! For factory-set video modes, you can recall only the original horizontal phase, width, vertical shift, and height settings. You cannot recall vertical convergence, horizontal convergence, or color temperature settings.

Professional Series II Monitor 27