1.Press MEM SEL. The LCD displays Mem Select : nt (where n is a number from 1 through 14 and indicates the current factory-set video mode).

2.Press MEM RCL. You see the message Recall Confirm ?.

3.To confirm that you want to recall the factory settings for the current video mode, press MEM RCL again. You briefly see the message Recall Update while the monitor restores the factory settings. Then the LCD displays the number of the current video mode.

Creating a User-defined Video Mode

When the LCD displays Mode not found, you can enter and save your own display parameter settings to create a user- defined video mode. (If the LCD is off, press the Brightness or Contrast button to turn it back on.)

Follow these steps to create a user-defined video mode:

1.Press FUNCT. The LCD displays the name of a display parameter you can adjust, such as Hor Phase : 4. The number next to the parameter name indicates the current setting.

2.You can adjust the displayed parameter as described in step 3 or press FUNCT until you see the name of a parameter you want to adjust. For example, if you want to center the image vertically, press FUNCT until the LCD displays

V e r t S h i f t .

28 Professional Series II Monitor