The monitor automatically selects which video mode to use. It analyzes the signal input (the frequency and polarity of the horizontal and vertical sync pulses) from the computer, checks the video modes stored in its memory, and uses the most appropriate mode. The signal input depends on the computer, display adapter card, and application program you are using.

The sections below explain how to modify a video mode, recall

afactory-set video mode, and create a user-defined video mode. For each mode, you can set any of the four display parameters listed in the following table. Refer to this table as you follow the steps below.

Display parameters

Parameter Function

Horizontal Centers the image horizontally. Press and hold down the

phase t side of the Adjustment button to move the image left, or the + side to move the image right. 1

Width

Adjusts the width of the image. Press and hold down the

 

side of

the Adjustment button to reduce the width of the

 

image,

or the + side to increase its width. •

IEl-II-

I

Professional Series II Monitor 2 3