Epson Series II The LCD displays Mode not found, There is an image on the screen but the LCD is dim

5.Check if you need to set up your application program(s) to match your monitor.

6.Contact your dealer or service representative; the monitor needs repair.

The screen is blank and the LCD does not display a SYNC OFF error message.

1.Adjust the brightness and contrast as described on page 21.

2.Contact your dealer or service representative; the monitor needs repair.

There is an image on the screen but the LCD is dim.

The monitor is operating properly. If you do not touch the power button or any control panel buttons for about

30 seconds, the monitor automatically turns off the LCD. When the LCD is off, you can still see a dim image on it.

To turn the LCD back on when it dimly displays the number of the current video mode or Mode not found, press the - or + side of the Brightness or Contrast button. To turn the LCD back on when it dimly displays Mem Select, press MEM SEL.

The LCD displays Mode not found.

The display parameter settings for the current video mode have not been stored in the monitor’s memory. You may create a user-defined video mode, as described on page 28, or continue working. The monitor operates properly even if you do not create a user-defined video mode and the LCD continues to display Mode not found.

4 0 Professional Series II Monitor