Note

If the LCD still flashes H/V SYNC OFF after you press INPUT SEL, see page 39 in “Troubleshooting.”

Adjusting the Brightness and Contrast

To make the image on the screen clear and easy-to-read, use the Brightness and Contrast buttons (shown below) to adjust and save the monitor’s brightness and contrast settings. The Brightness button controls the screen’s background (raster) intensity and the Contrast button controls the intensity of the displayed image.

Brightness button

Contrast button

To adjust the brightness and contrast, follow these steps:

1.To adjust the brightness, press the - or + side of the Brightness button. The LCD displays a scale composed of vertical bars, such as Brght : 11111.

Press and hold down the + side of the Brightness button to increase the brightness or the - side to decrease it. When you reach the minimum brightness setting, a small square replaces the scale of vertical bars. At the maximum setting, an arrow appears on the right side of the scale.

Professional Series II Monitor 2 1