To maximize the brightness of all the monitors you connect, always set the HIGHi75Q switches to HIGH on all the monitors except the last one and set the last monitor’s switch to 75R.

For example, if you connect three monitors to one video controller, set the switches on the monitors as shown below. If one of the monitors you are connecting does not have a HIGHI75R switch, it is probably permanently set to 7512; use it only as the last monitor (monitor 3 below).

c o m p u t e r

monitor 1

monitor 2

monitor 3

9.Plug each monitor’s power cord into the AC power inlet on its back panel and then into a grounded (earthed) electrical outlet.

Connecting three monitors

To connect three monitors to one video interface, follow the appropriate steps above as well as these general guidelines:

UConnect T connectors to the BNC connectors on the first and second monitors.

UConnect the color-coded video interface cable to the computer’s video interface and the appropriate

T connectors on the first monitor.

UUse 75Q video interface cables to connect the first monitor to the second monitor and the second monitor to the third monitor.

USet the monitors’ HIGHi75Q switches as described at the top of this page.

Professional Series II Monitor 15