Ericsson LBI-38732E manual ProSound, Priority System Scan, Menu Selection

ProSound™

The radio may be programmed for ProSound system scan operation for multi-site applications. ProSound scanning is an enhanced replacement for wide area system scanning. This algorithm insures that the radio continually receives high quality audio. When the se- lected system degrades to a pre-programmed level, the radio changes to the new system and sounds a tone. Should the control channel be lost completely, the radio will scan the adjacent systems until a suitable one is found.

Priority System Scan

The radio may also be programmed for priority sys- tem scan. A priority system may be assigned among the systems programmed into the radio. Radios programmed in this manner will check for the priority trunked system’s control channel at a programmable rate ranging from 1 to 16 minutes. This priority scan timer is reset each time the PTT button is pressed or when a call is received. If the priority system control channel is found, the radio will automatically switch to the priority system.

Menu Selection

Press Mand then use the <>control to scroll through the selections until SYS SCAN is dis- played. Then press Mto toggle the System Scan state. The SYSC ON or SYSC OFF display message is displayed for two seconds to show the new state.

67