NOTE
A value of 16 requires a strong signal to open squelch, a value of 2 requires a very weak signal to open squelch and a value of 1 is open squelch.
NOTE
When squelch adjust feature is activated, Channel Guard, T99 decode and Scan are disabled. When the squelch adjust feature is Channel Guard, T99 decode and Scan are
restored to their previous states.
Menu Selection
1.exited,Press the mkey and then use the RAMP control or .to scroll through the selections until
SQUELCH is displayed. Then press m(SE- LECT) again.
2.The display will show SQLCH=xx, where "xx" is the value between 1 and 16.
3.Use the RAMP control ,or .to scroll through the values. Then press the mkey to save the new value after the display
4.If the mkey is pressed before the
90