Ericsson LBI-38732E manual Sending A Call

6.GROUP CALL - When the radio receives a group call, it unmutes on the assigned working channel and BSY comes on. Line one shows GR followed by the logical ID number (if received) of the unit sending the message, or the associated name if the ID number is found in the individual call list.

7.INDIVIDUAL CALL - When the radio receives an individual call (a call directed only to the user’s radio), it unmutes on the assigned working channel and turns on BSY and WHC . Line one shows ID fol- lowed by the logical ID number of the unit sending the message, or the associated name if the ID num- ber is found in the individual call list.

Responding to the call prior to the programmed call-back time-out will automatically direct the call to the originating unit. If the caller’s ID is not received, UNKNOWN will display and there will be no call-back hangtime.

SENDING A CALL

1.Turn on the radio and set the POWER ON-OFF/VOL- UME knob to the desired volume level. Select the desired system and group.

2.Press and hold the PTT button. The radio will display XMIT , the system and group names and perform the necessary signalling required to obtain a com- munication channel.

62