INDIVIDUAL CALLS
Receiving And Responding To An Individual Call (Trunked Mode Only)
When the radio receives an individual call (a call directed only to the user’s radio), it unmutes on the assigned working channel and turns on the BSY indi- cator. Line one shows ID followed by the logical ID number of the unit sending the message, or the associ- ated name if the ID number is found in the individual call list. The individual call indicator display *INDV* is dis- played on line two. The radio can be programmed to ring when an individual call is received. If enabled, the ring begins five seconds after the caller unkeys and will continue#until the PTT button, the CLEAR button or
is pressed.
If a response is made to the call prior to the pro- grammed
normal receive mode, but WHC will be displayed. If the caller’s ID is not received, UNKNOWN will display for the duration of the call and there will be no
#To respond after the
the PTT button at this point will initiate an individual call back to the original caller. (If the last call was a group call, the display will show WHCG=1. Pressing the PTT button will place the call as an individual call.) The radio
72