Ericsson LBI-38732E manual Adding Channels To A Scan List

switched to the priority channel. Scanning of the priority- one channel will continue if a message is being received on the priority-two channel.

While receiving a call on a non-priority or a priority two channel, the radio periodically checks the priority one and two channels. If Scan with Channel Guard is en- abled, the radio will use Channel Guard to decide whether to unmute on a priority channel. The radio will stop, on squelch detection, on a priority channel. In normal operation, the radio will unmute only on detecting the correct Channel Guard; otherwise, it will remain muted until the priority channel call and hang time have ended.

An optional feature allows the radio to continue scan- ning upon the detection of the wrong Channel Guard on a priority channel. The user can then select the rate this channel is scanned until the call there ends.

The following procedures outline scan operations for conventional channels.

ADDING CHANNELS TO A SCAN LIST

1.With scan operation turned off select the desired channel to add to the selected conventional system’s channel scan list.

2.Press 6. S comes on. This sets the selected

6channel for non-priority scanning. A second press of sets the channel for priority-two scanning and 2 comes on. An additional press of 6sets the

channel for priority-one scanning and 1 comes on. If

96