Manuals / Ericsson / Portable Media / Portable Radio

Ericsson LBI-38732E manual XMIT ON - indicates the radio is transmitting

Models: LBI-38732E

1 112

Download 112 pages 8.53 Kb

Page 30

SPC ON - indicates the radio is in the special call select/entry mode (Individual or Tele- phone Interconnect).

HI ON - indicates the selected group or chan- nel is selected to transmit at high power. OFF - indicates the selected group or channel is selected to transmit at low power.

XMIT ON - indicates the radio is transmitting.

When operating in a trunked system, the radio may be programmed to automat- ically transmit (without pressing PTT) to maintain digital communication with the

site controller. XMIT will turn on whenever the radio is transmitting.

SCN ON - indicates the scan mode is enabled.

FLASHING - indicates Scan is temporarily disabled.

SON - indicates the selected group or chan- nel is in the scan list.

1ON - (conventional mode only) indicates the selected channel is designated as the priority-one scan channel.

2ON - (conventional mode only) indicates the selected channel is designated as the priority-two scan channel.

30

Image 30

Ericsson LBI-38732E manual XMIT ON - indicates the radio is transmitting, SCN ON - indicates the scan mode is enabled

Contents

EDACS M-RK II PORTABLE RADIO LBI-38732E Operator’s ManualThis manual covers Ericsson and General Electric products BATTERY CHARGING AND CARE TABLE OF CONTENTSSAFETY INFORMATION TRANSCEIVER SERVICEEDACS TRUNKED MODE OPERATION PROGRAMMABLE ENTRIESCONVENTIONAL MODE OPERATION DTMF Overdial/Conventional Mode TelephoneSCANNING CONVENTIONAL CHANNELS SUPPLEMENTARY INFORMATION PRODUCT SPECIFICATION FOR CE MARKED EQUIPMENTEUROPEAN STANDARDS prETS 300 279 AugustSAFETY INFORMATION BATTERY CHARGING AND CARE Figure 1 - Installing And Removing The Battery Pack FOR BEST PERFORMANCE EXTENDED OPERATIONS TRANSCEIVER SERVICE FCC LICENSINGINTRODUCTION USER INTERFACE Figure 2 - M-RK II Portable Radio Figure 3 - Top And Partial Left Panel Views BUTTONS AND KNOBS EMERGEN- The EMERGENCY/HOME button is TON PTT PUSH-TOTALK BUT KEYPADm press and hold either key 1 ter keyGROUP/CHANNEL SELECTION 2 for details 3 for details DISPLAY SYS BUSY MessagesQUEUED DENIEDTALKARND CC SCANWA SCAN RXEMERLOW BATT TXEMERVOL = UNKNOWNDATA OFF TX DATARX DATA DATA ONT99 ON SYSC ONSYSC OFF T99 OFFStatus Indicators FRCD PVTNO KEY # BSY Channel Busy - In trunked mode CG Conventional mode onlyFLASHING - indicates Channel Guard is temporarily disabled FLASHING - indicates a call has been queued In conventional modeXMIT ON - indicates the radio is transmitting SCN ON - indicates the scan mode is enabledFLASHING - indicates Scan is temporarily disabled site controller. XMIT will turn on whenever the radio is transmittingUNIVERSAL DEVICE CONNECTOR UDC ALERT TONES Autokey Trunked Mode OnlyCall Queued Trunked Mode Only Call OriginateCarrier Control Timer System Busy Trunked Mode OnlyCall Denied Trunked Mode Only Low Battery WarningLow Battery Alert Transmit Lockout Key Press AlertOPERATION KEYPAD LOCK/UNLOCK TURNING ON THE RADIO X X X X X X X Y Y Y = Z Z Z S O U T HS Y S = tone sounds when is pressed A S TS E L S Y S list being used for selectionMENU To enter the menu mode, press m. mM E N U Y Y Y Y Y Y Y Y M E N U B C K L G H TB C K L = X X Y Y Y Y Y Y Y Y The menu item’s parameter setting shown in the FEATURE Table 1 - Menu Item InformationDISPLAY Feature Encryption Display is available through the menu function and, if programmed, appears in the menu as “FEATURES.” This data indicates current features programmed into the radio as well as information re- quired to add features to the radio. This feature applies to 512K RAM radios only FEATURE ENCRYPTION DISPLAYFEATURE DISPLAYSerial Number ROM 12 Hex Digits Feature Encryption Data Stream Number Fields∙ SG# -XXX - Maximum number of system/groups combination available Features Enabled SY#XXX - EDACS maximum trunked system limitCH#XXX - Maximum number of conventional chan- nels available SYSTEM/GROUP/CHANNEL SELECTION System Selection The display registers the new system name on line one Group And Channel Selection EMERGENCY/HOME BUTTON DEFINITION HomeAEGIS AND VOICE GUARD OPERATION Voice Modes Aegis Digital Mode Clear ModesDTMF DSP ERR Error MessagesDSP ERR ERR=xxxx HARDWARE ERR= AEGIS PRIVATE AND VOICE GUARD PRIVATE MODESTransferring Keys Into The Radio Displaying The Currently Used Cryptographic Key Number Key Zero PRIVATE OPERATION Receiving An Encrypted Call Transmitting An Encrypted CallScanned Group Calls LAST SYSTEM/GROUP OR CHANNEL RECALL SUPERVISORY RADIO UNITS ONLY EDACS TRUNKED MODE OPERATION RECEIVING A CALLSENDING A CALL CONVENTIONAL FAILSOFT SCAT OPERATION EMERGENCY OPERATIONReceiving An Emergency Call Declaring An Emergency CallSCANNING TRUNKED SYSTEMS Wide Area System ScanProSound Priority System ScanMenu Selection Adding Groups To A Scan List Pre-Programmed Keypad KeySCANNING TRUNKED GROUPS Deleting Groups From A Scan ListNuisance Delete Turning Scan OnTurning Scan Off PROGRAMMABLE ENTRIES Receiving And Responding To An Individual Call Trunked Mode Only INDIVIDUAL CALLSPage Call Storage Lists Sending An Individual Call Trunked Mode Only Receiving A Telephone Interconnect Call Trunked Mode Only Sending A Telephone Interconnect Call Trunked Mode OnlyTELEPHONE INTERCONNECT CALLS DTMF Overdial/Conventional Mode Telephone Interconnect 2. Overdial numbers are transmitted using either method below The following steps are required to dial these numbersPORTABLE DATA Data Displays Data Off Operation Data On OperationScan Lockout Mode Exiting Data CallsData Lockout Mode ProFile Select OptionMenu Option Option Availability ∙ ∙ ∙ ∙ STATUS/MESSAGE OPERATION Status OperationMessage Operation EDACS CONVENTIONAL P1 SCAN DYNAMIC REGROUP OPERATIONEmergency Operation MACRO KEY OPERATIONCONVENTIONAL MODE OPERATION SQUELCH ADJUST 256K & UP VERSION RADIOS ONLYrestored to their previous states Menu SelectionPre-Programmed Keypad Key RECEIVING A CALLSENDING A CALL EMERGENCY OPERATIONGE-STAR is programmed to transmit in one of the following methods Using 5-Tone Signalling For Emergency Declaration TONE ENCODE TRANSMISSIONSCANNING CONVENTIONAL CHANNELS ADDING CHANNELS TO A SCAN LIST DELETING CHANNELS FROM A SCAN LIST NUISANCE DELETETURNING SCAN ON TURNING SCAN OFFTYPE 99 DECODE CONVENTIONAL ONLY Menu Selection Pre-Programmed Keypad KeyOPERATING RULES AND REGULATIONS OPERATING TIPS BATTERY PACKS INTRINSICALLY SAFE USAGEACCESSORIES GLOSSARY group or subfleet provides a direct unit-to-unit short range com SYSTEM SYSTEM NUMBER NAME OPERATOR’S RADIO SETUP RADIO TYPE FREQUENCY BAND OPERATOR’S NAMEEMERGENCY GROUP TRK/CNV GRP/CHN GRP/CHN NUMBER NAMESYSTEM SYSTEM NUMBER NAME TRK/CNV GRP/CHN GRP/CHN NUMBER NAMEWARRANTY NICKEL-CADMIUM BATTERY WARRANTY Ericsson Inc EMERGENCY NUMBERS Police State Police Fire Poison Control AmbulanceLife Saving and Rescue Squad Private Radio Systems Mountain View Road Lynchburg,Virginia