used during the selection process. The following example systems list is used to explain the process:
SYSTEM
1NORTH
2SOUTH
3EAST
4WEST
After entering a selection mode, the following generic display format will appear.
X X X X X X X X
Y Y Y = Z Z Z
Line one shows the currently selected item name
(XXXXXXXX)from the list. Line two indicates the list
(YYY)that the selection is to be made from and the number of the selected item (ZZZ) within the list. (In some cases the information on lines 1 and 2 will be the opposite of this example.) If SYSTEM 2 is the current selection, the display appears as follows:
S O U T H |
|
S Y S = | 2 |
Line one contains the current system name, SOUTH and line two, SYS = 2, indicates that selection is from the system list and it is the second system within the list.
A new system from the list is selected by using , and .or by directly entering the system number with the numeric keys. ,and .scroll through the list in increasing and decreasing order respectively.
36