Ericsson LBI-38732E manual Portable Data

METHOD 2: Press *to enter the overdial se- lect/entry mode and follow the selection mode rules to call up a stored number from the phone list or to directly enter the overdial digits. SPC turns on. Press PTT to send the overdial sequence once. If the nu ber needs to be transmitted again, it

ust be selected or entered again (this prevents unwanted numbers from being sent the next time the PTT button is pressed during the call).

This overdial select/entry mode remains activemuntil the call is dropped, cleared, or is pressed. The overdial select/en- try mode can be re-entered if the call is still

active by pressing *.

PORTABLE DATA

When operating in the EDACS configuration, M-RK radios permit either voice or data calls to be transmitted or received. The radio can handle only one type of call at a time; however, selection of either data or voice is elected transparently by the operator through normal usage of the radio. Data communications is not sup- ported in the conventional mode. DATA, RS2-Type DATA, and ProFile are EDACS enhanced, separately pur- chased features that when turned on can be used to configure M-RK radios.

"Data" now applies to two classes of data: External Device Data Applications (Mobile Data Terminals) and Radio Destined Data Applications (ProFile). For Exter- nal Device Data Applications, both destination and

79