Manuals / Ericsson / Portable Media / Portable Radio

Ericsson LBI-38732E manual Sending A Call, Emergency Operation

Models: LBI-38732E

1 112

Download 112 pages 8.53 Kb

Page 92

5.When the radio receives a call (and the correct encoding is decoded, if programmed and enabled), it unmutes on the channel and BSY comes on.

SENDING A CALL

1.Turn on the radio and set the POWER ON-OFF/VOL- UME knob to the desired volume level. Select the desired conventional system and channel.

2.Ensure that the channel is not busy by pressing the CLEAR/MONITOR button to momentarily disable any channel decoding and unmute the receiver or observe the display for the absence of XMIT . If the Channel Busy Lockout feature is programmed for the selected channel, the radio will not transmit when the channel is busy.

3.Press and hold the PTT button. The radio will display XMIT and a short beep sounds (if programmed) indicating that communication can begin

4.Hold the radio approximately three inches from the mouth and speak in a normal voice into the micro- phone (located between ,and .on the keypad).

5.Release the PTT button when the transmission is complete and listen for a reply.

EMERGENCY OPERATION

If enabled, GE-STAR emergency signalling can be transmitted when operating in the conventional mode.

92

Image 92

Ericsson LBI-38732E manual Sending A Call, Emergency Operation

Contents

EDACS M-RK II PORTABLE RADIO LBI-38732E Operator’s ManualThis manual covers Ericsson and General Electric products TABLE OF CONTENTS SAFETY INFORMATIONBATTERY CHARGING AND CARE TRANSCEIVER SERVICEEDACS TRUNKED MODE OPERATION PROGRAMMABLE ENTRIESSCANNING CONVENTIONAL CHANNELS CONVENTIONAL MODE OPERATIONDTMF Overdial/Conventional Mode Telephone PRODUCT SPECIFICATION FOR CE MARKED EQUIPMENT EUROPEAN STANDARDSSUPPLEMENTARY INFORMATION prETS 300 279 AugustSAFETY INFORMATION BATTERY CHARGING AND CARE Figure 1 - Installing And Removing The Battery Pack FOR BEST PERFORMANCE EXTENDED OPERATIONS TRANSCEIVER SERVICE FCC LICENSINGINTRODUCTION USER INTERFACE Figure 2 - M-RK II Portable Radio Figure 3 - Top And Partial Left Panel Views BUTTONS AND KNOBS EMERGEN- The EMERGENCY/HOME button is PUSH-TO TALK BUTTON PTT KEYPADGROUP/CHANNEL SELECTION 2 for details m press and hold either key1 ter key 3 for details DISPLAY Messages QUEUEDSYS BUSY DENIEDCC SCAN WA SCANTALKARND RXEMERTXEMER VOL =LOW BATT UNKNOWNTX DATA RX DATADATA OFF DATA ONSYSC ON SYSC OFFT99 ON T99 OFFNO KEY # Status IndicatorsFRCD PVT CG Conventional mode only FLASHING - indicates Channel Guard is temporarily disabledBSY Channel Busy - In trunked mode FLASHING - indicates a call has been queued In conventional modeSCN ON - indicates the scan mode is enabled FLASHING - indicates Scan is temporarily disabledXMIT ON - indicates the radio is transmitting site controller. XMIT will turn on whenever the radio is transmittingUNIVERSAL DEVICE CONNECTOR UDC Autokey Trunked Mode Only Call Queued Trunked Mode OnlyALERT TONES Call OriginateSystem Busy Trunked Mode Only Call Denied Trunked Mode OnlyCarrier Control Timer Low Battery WarningOPERATION KEYPAD LOCK/UNLOCK Low Battery Alert Transmit LockoutKey Press Alert TURNING ON THE RADIO S Y S = X X X X X X X Y Y Y = Z Z ZS O U T H A S T S E L S Y Stone sounds when is pressed list being used for selectionMENU To enter the menu mode, press m. mB C K L = X X Y Y Y Y Y Y Y Y M E N U Y Y Y Y Y Y Y YM E N U B C K L G H T The menu item’s parameter setting shown in the DISPLAY FEATURETable 1 - Menu Item Information FEATURE ENCRYPTION DISPLAY FEATUREFeature Encryption Display is available through the menu function and, if programmed, appears in the menu as “FEATURES.” This data indicates current features programmed into the radio as well as information re- quired to add features to the radio. This feature applies to 512K RAM radios only DISPLAYSerial Number ROM 12 Hex Digits ∙ SG# -XXX - Maximum number of system/groups combination available Feature Encryption Data StreamNumber Fields CH#XXX - Maximum number of conventional chan- nels available Features EnabledSY#XXX - EDACS maximum trunked system limit SYSTEM/GROUP/CHANNEL SELECTION System Selection The display registers the new system name on line one Group And Channel Selection EMERGENCY/HOME BUTTON DEFINITION HomeAEGIS AND VOICE GUARD OPERATION Voice Modes Aegis Digital Mode Clear ModesDTMF Error Messages DSP ERR ERR=xxxxDSP ERR HARDWARE ERR= AEGIS PRIVATE AND VOICE GUARD PRIVATE MODESTransferring Keys Into The Radio Displaying The Currently Used Cryptographic Key Number Key Zero PRIVATE OPERATION Receiving An Encrypted Call Transmitting An Encrypted CallScanned Group Calls LAST SYSTEM/GROUP OR CHANNEL RECALL SUPERVISORY RADIO UNITS ONLY EDACS TRUNKED MODE OPERATION RECEIVING A CALLSENDING A CALL CONVENTIONAL FAILSOFT SCAT OPERATION EMERGENCY OPERATIONReceiving An Emergency Call Declaring An Emergency CallSCANNING TRUNKED SYSTEMS Wide Area System ScanMenu Selection ProSoundPriority System Scan Pre-Programmed Keypad Key SCANNING TRUNKED GROUPSAdding Groups To A Scan List Deleting Groups From A Scan ListNuisance Delete Turning Scan OnTurning Scan Off PROGRAMMABLE ENTRIES Receiving And Responding To An Individual Call Trunked Mode Only INDIVIDUAL CALLSPage Call Storage Lists Sending An Individual Call Trunked Mode Only TELEPHONE INTERCONNECT CALLS Receiving A Telephone Interconnect Call Trunked Mode OnlySending A Telephone Interconnect Call Trunked Mode Only DTMF Overdial/Conventional Mode Telephone Interconnect 2. Overdial numbers are transmitted using either method below The following steps are required to dial these numbersPORTABLE DATA Data Displays Data Off Operation Data On OperationScan Lockout Mode Exiting Data CallsMenu Option Data Lockout ModeProFile Select Option Option Availability ∙ ∙ ∙ ∙ STATUS/MESSAGE OPERATION Status OperationMessage Operation EDACS CONVENTIONAL P1 SCAN DYNAMIC REGROUP OPERATIONEmergency Operation MACRO KEY OPERATIONCONVENTIONAL MODE OPERATION SQUELCH ADJUST 256K & UP VERSION RADIOS ONLYrestored to their previous states Menu SelectionPre-Programmed Keypad Key RECEIVING A CALLSENDING A CALL EMERGENCY OPERATIONGE-STAR is programmed to transmit in one of the following methods Using 5-Tone Signalling For Emergency Declaration TONE ENCODE TRANSMISSIONSCANNING CONVENTIONAL CHANNELS ADDING CHANNELS TO A SCAN LIST DELETING CHANNELS FROM A SCAN LIST NUISANCE DELETETURNING SCAN ON TURNING SCAN OFFTYPE 99 DECODE CONVENTIONAL ONLY Menu Selection Pre-Programmed Keypad KeyOPERATING RULES AND REGULATIONS OPERATING TIPS BATTERY PACKS INTRINSICALLY SAFE USAGEACCESSORIES GLOSSARY group or subfleet provides a direct unit-to-unit short range com OPERATOR’S RADIO SETUP RADIO TYPE FREQUENCY BAND OPERATOR’S NAME EMERGENCY GROUPSYSTEM SYSTEM NUMBER NAME TRK/CNV GRP/CHN GRP/CHN NUMBER NAMESYSTEM SYSTEM NUMBER NAME TRK/CNV GRP/CHN GRP/CHN NUMBER NAMEWARRANTY NICKEL-CADMIUM BATTERY WARRANTY EMERGENCY NUMBERS Police State Police Fire Poison Control Ambulance Life Saving and Rescue SquadEricsson Inc Private Radio Systems Mountain View Road Lynchburg,Virginia