Ericsson LBI-38732E manual TYPE 99 DECODE CONVENTIONAL ONLY

TYPE 99 DECODE (CONVENTIONAL ONLY)

If the Type 99 Decode Option has been pre-pro- grammed, individual selective calling is possible. The radio can now decode individual, group or supergroup paging calls. Two sets of Type 99 paging codes must be pre-programmed into the radio. When the radio decodes an appropriate Type 99 code sequence, an alert tone and visual indicator is provided to the user. The receiver then operates as a noise squelched unit until Type 99 is reset. Type 99 decode continues to operate during this noise squelched period. The appropriate Type 99 alert tone will sound again if it detects a valid two-tone sequence.

Type 99 operation can be pre-programmed to be enabled or disabled using the OPTION button or a se- lected keypad key. Type 99 operation may be reset manually or automatically (pre-programmed). Manual reset is achieved by briefly pressing the CLEAR button. Automatic reset, if enabled, occurs after a 30 second interval following the most recent decode of a Type 99 tone sequence.

NOTE

T99 is automatically disabled when Scan is enabled.

99