Ericsson LZT-1872R1A manual Edacs Operation Receiving a Message

EDACS OPERATION

RECEIVING A MESSAGE

1.Turn the radio on by rotating the ON/OFF/VOLUME control clockwise from the OFF detent position. After the radio has passed the power-up self test an optional tone will sound and the current System and Group will be displayed. If the unit does not pass the test, an error message will be displayed (see ERROR MESSAGES section) or the display will be blank.

2.Press the SHIFT/CLR/MONITOR button and then use the SELECT buttons <or > to select an EDACS system. Press the SHIFT/CLR/MONITOR button to exit system select.

3.Use the SELECT buttons <or >to select the desired group. The GRP icon will indicate the current Group selected. The radio is now ready to receive messages.

4.INDIVIDUAL CALL - If an individual call (call directed only to your radio) is received, the radio unsquelches on the assigned channel. The BUSY flag lights. If programmed on, the individual call received tones (one high followed by one low) will sound and the originator’s ID or just “ID” (dependent upon programming) is displayed for a short time.

27