selection. The PHONE and status flags will also be illuminated while in the Special Call Mode.
2. Enter the telephone number to be called. The last
manually from the keypad, press thenumberkey.
digit entered will always be displayed in the far right hand side of the display. Any p eviously entered digits will scroll left. Only the last seven digits will be visible at a time with the leading digit scrolling off the display upon each new key entry. To backspace and clear a digit, press the skey.
NOTE
To recall the last interconnect entered
3.Complete the telephone entry by pressing the * key. The *key indicates the digits are for an interconnect call. This will not be displayed but a tone will sound.
4.Press and release the PTT bar to initiate the call. The radio performs the necessary signaling required to obtain a working channel. When the signaling is successfully completed the BUSY flag lights and the proper DTMF tones will be sent and heard at the speaker. If the interconnect signaling is unsuccessful, the radio will remain in the Special Call Mode and sound the appropriate alert tone(s).
5.When someone answers, press the PTT bar and speak directly into the microphone. Release the
34
