30
1. Press and hold the SHIFT/CLR/MONITOR button.
2. Use the SELECT or buttons to adjust
the squelch. Pressing the SELECT will open
the squelch and pressing the SELECT will
close the squelch.
The radio must be on a Conventional System or an
EDACS working Channel (i.e. receivi ng a voice call )
to adjust the squelch. It is recommended to adjust
squelch from a Conventional System.
NOTE
SENDING A SPECIAL CALL
1. Press the key to put the radio into Special Call
mode and provide access to a pre-programmed
special call alpha-numeric list. Each selection from
the list is pre-programmed with either an individual
number or an interconnect number. If programmed,
the special call alpha-numeric will be displayed. The
PHONE and status flags will also be illuminated
while in the Special Call mode.
2. Press the SELECT or buttons to
increment or decrement through the special call list.