Receiving A Message
1.Press the SHIFT/CLR/MONITOR button and then use the SELECT buttons<or >to select a Direct Mode System. The SYStem display will indicated the current System selected.
2. Use the SELect buttons or >to select the desired Channel. The radio is now ready to receive message.
3.Press the SHIFT/CLR/MONITOR button twice (“double click”) and hold to disable squelch and monitor the channel. Adjust the VOLUME control to the desired audio level.
NOTE
Pressing the SHIFT/CLR/MONITOR twice (“double click”) to monitor the channel may affect Busy Tone signalling if programmed for the select channel.
4.When a message is received (and the correct Busy Tone signal is decoded, if programmed and enabled) the receiver will unsquelch and the message will be heard.
Sending A Message
1.Turn the radio on and set the desired System and Channel as described in the previous section.
62
