Ericsson LZT-1872R1A manual GE-MARC Operation Receiving a Message, Select

GE-MARC OPERATION

RECEIVING A MESSAGE

1.Turn the radio on by rotating the ON/OFF/Volume control clockwise from the OFF detent position. After the radio has passed the power-up self test an optional tone will sound and the current System and Channel will be displayed. If the unit does not pass the test, an error message will be displayed, or the display will be blank.

2.Press the SHIFT/CLR/MONITOR button and then>use the SELECT buttons <or select a GE-MARC system. Press SHIFT/CLR/MONITOR button to exit system

select.

3.Use the SELECT buttons <or > select the desired Group. The GRP icon will indicate the current Group selected. The radio is now ready to receive messages.

4.INDIVIDUAL CALL - If an individual call (call directed only to your radio) is received, the radio unsquelches on the assigned channel and the BUSY flag lights. The individual call received tones (one high followed by one low) will sound and the display changes to *INDV*. The call received tones may be programmed off.

45