necessary to adjust the squelch, the squelch may be adjusted using the following procedure:
NOTE
The radio must be on a Conventional System or an EDACS working Channel (i.e. receiving a voice call) to adjust the squelch. It is recommended to adjust squelch from a Conventional System.
1.Press and hold the SHIFT/CLR/MONITOR button.
2.Use the <or >keys to adjust the squelch. Pressing the <will open the squelch and pressing the >will close the squelch.
SENDING A MANUALLY ENTERED INTERCONNECT CALL
1.Select a channel in your radio system that has telephone interconnect capability. The radio should be programmed for DTMF operation on this channel.
2.Press and hold the PTT bar to key the transmitter.
3.While holding the PTT bar, press either the * key or the #key as required by the radio system to obtain a telephone line. The radio will transmit the selected tone.
69
