| Autokey below). |
Autokey | When the PTT is keyed to place a |
(EDACS) | call on the system, but the PTT is |
| released before getting to the |
| channel (e.g. a queued call), the |
| radio automatically keys on the |
| channel when it gets the assignment. |
| The radio generates a long beep and |
| holds the transmitter keyed for two |
| seconds. Pressing the PTT button |
| keeps the channel and sends the |
| message before this two second |
| |
System Busy | EDACS - If you key the PTT bar and |
| hear three short, medium pitched |
| tones, this indicates that the |
| receiving party is already engaged in |
| another call or the system is busy |
| and its queue is full. You must rekey |
| later to access the system. |
| |
| and hear a low frequency tone for 1 |
| second this indicates all channels are |
| busy. |
Call Denied | A single low pitch beep will sound |
(EDACS) | when the PTT switch is keyed and |
| the request is denied by the system. |
| This happens if the unit is an invalid |
| user or if the unit is requesting an |
23
