Euphonix SH612 manual Time Code Mode, Time Code Offset, Jam Sync Mode

Euphonix SH612 Studio Hub User Guide Menu Reference and Technical Specifications

Time Code Mode

The SH612 has three time code outputs: VITC, LTC, MTC. The time code outputs al- ways represent the current time of the SH612.

Generate - This is the default mode for the SH612. Time code is internally generated, routed to the time code outputs, and sample-rate-resolved.

External - With this setting the SH612 is locked to an external time code source and generates the received time code position information at its outputs. This setting corre- sponds to the Slave key on the R-1 Remote.

External Varispeed - This feature is available only on SH612s configured for R-1 systems.

Time Code Offset

Time Code Offset is only relevant when the SH612 is slaved to an external device or an external device is slaved via LTC from the R-1. The R-1 does not output offset Time- code. The Time Code Offset can be positive or negative, and range from 1 frame to 23:59:59:29. A negative offset is subtracted from the Time Code Source value; a posi- tive Offset is added to the Time Code Source value. The equation for Current Time is:

TC Current Time = TC Source +/- TC Offset

The Time Code Offset defaults to 00:00:00:00 unless specifically set by the user.

To set the offset:

1.Use the left/right arrow keys to position the cursor under each of four double- digit fields.

2.Use the SpinKnob to set the desired number.

3.To create a negative offset, position the cursor under the + sign and use the SpinKnob to change to the minus sign.

Jam Sync Mode

Jam Once - Locks when time code is first received and runs independent of incoming time code thereafter.

Jam Continuous - Locks continuously to incoming time code and resynchronizes whenever necessary.

35