Exmark Lazer HP manual Dimensions, Torque Requirements

Deck Depth: 60” Deck: 5.5” (14.0 cm) 72” Deck: 5.5” (14.0 cm)

2.10.7Cutting Height Adjustment: an extra-long cushioned lever is used to adjust the cutting height from 1 1/2” (3.8 cm) to 5” (10.2 cm.) in 1/4” (.64 cm) increments. The cutting height adjustment handle has a transport position and all adjustments can be made while the operator remains seated. Units also have a foot operated deck lift assist lever to aid in raising the deck.

2.10.8Mulching Kit: Optional.

2.11DIMENSIONS

2.11.1	Overall Width:		without deck	deflector up	deflector down
		w/60” Deck	53.5 in. (135.9 cm)	61.4 in. (156.0 cm)	72.2 in. (183.4 cm)
		w/72” Deck	57.3 in. (145.5 cm)	73.4 in. (186.4 cm)	84.3 in. (214.1 cm)
2.11.2	Overall Length:
			w/60” Deck	w/72” Deck
		Roll Bar - Up	80.7 in. (205.0 cm)	84.8 in. (215.4 cm)
		Roll Bar - Down	89.2 in. (226.6 cm)	93.6 in. (237.7 cm)

2.11.3Overall Height:

Roll Bar - Up	Roll Bar - Down
71.9 in. (182.6 cm)	53.8 in. (136.7 cm)

2.11.4Tread Width: (center to center of tires, widthwise)

	w/60” Deck	w/72” Deck
Drive wheels	41.9 in. (106.4 cm)	45.9 in. (116.6 cm)
Caster wheels	39.0 in. (99.1 cm)	47.6 in. (120.9 cm)

2.11.5Wheel Base: (center of caster tire to center of drive tire)

w/60” Decks w/72” Deck

50.3 in. (127.8 cm) 54.5 in. (138.4 cm)

2.11.6Curb Weight:

w/60” Deck	w/72” Deck
1403 lbs. (636 kg)	1408 lbs. (639 kg)

2.12 TORQUE REQUIREMENTS

Bolt Location	Torque
Cutter Housing Spindle Nut	140-145 ft-lbs. (190-197 N-m)
Blade Mounting Bolt	115-120 ft-lbs. (156-163 N-M)
Engine Deck/Front Frame Mount Bolts	30-35 ft-lbs. (41-47 N-M)
Anti-Scalp Roller Bolts	40-45 ft-lbs. (54-61 N-M)
Engine Mounting Bolts	25-30 ft-lbs. (34-41 N-M)
Wheel Lug Nuts	90-95 ft-lbs. (122-129	N-M)
Wheel Motor Mounting Bolts	72-77 ft-lbs. (98-104 N-M)
Wheel Hub Slotted Nut	minimum125 ft-lbs. (169	N-M)
Rollover Protection System (roll bar) Mounting Bolts	30-35 ft-lbs. (41-47	N-M)

- 14 -