Exmark Lazer HP manual Safety Signs

1.6SAFETY SIGNS

1.6.1Keep all safety signs legible. Remove all grease, dirt and debris from safety signs and instructional labels.

1.6.2Safety signs must be replaced if they are missing or illegible.

1.6.3When new components are installed, be sure that current safety signs are affixed to the replaced components.

1.6.4New safety signs may be obtained from your authorized Exmark equipment dealer or distributor or from Exmark Mfg. Co. Inc.

1.6.5Safety signs may be affixed by peeling off the backing to expose the adhesive surface. Apply only to a clean, dry surface. Smooth to remove any air bubbles.

1.6.6Familiarize yourself with the following safety signs and instruction labels. They are critical to the safe operation of your Exmark commercial mower.

PART NO. 103-3794	PART NO. 103-3979
LOCATION: LH Side of Console	LOCATION: RH Side of Console

PART NO. 107-2112

LOCATION: Top Center of Floorpan

PART NO. 103-4930

LOCATION: Right of Choke

	Control on RH
PART NO. 103-1798	Fuel Tank
LOCATION: Right of Throttle
Control on RH
Fuel Tank

			PART NO. 98-5954
PART NO. 107-2102			LOCATION: Under Mower Deck
		PART NO. 103-4474
LOCATION: Inside Surface of				Belt Shield(s)
	Upper Roll bar	LOCATION: Top Front of RH Fuel Tank

- 9 -