Extron electronic 130xi, 150xi Mounting the interface, 7 - Attaching the under desk brackets

Mounting the interface

To mount the interface under a desk or in a podium, do the following:

1.Attach the mounting brackets to the interface using six machine screws supplied with the mounting kit (see figure 2-7).

INPUT

BUFFERED	LOCAL
MONITOR
	OUTPUT

H.

SHIFT

MAC	INTERFACE	W 103 xi
	RGB
		/ADSP

Figure 2-7 — Attaching the under desk brackets

2.Using the to-scale template at the back of this manual to guide you, mark the four screw holes on the underside of the surface to which you are mounting the interface. Use the under desk mounting template.

3.Drill four pilot holes, each 3/32” in diameter by 1/4” deep, where marked.

4.Using the four wood screws provided, attach the brackets under the mounting surface (see figure 2-8).

INPUT

BUFFERED	LOCAL
MONITOR
	OUTPUT

H.

SHIFT

MAC	INTERFACE	W 103 xi
	RGB
		/ADSP

Figure 2-8 — Mounting the interface under a desk

RGB 130xi , 134xi , 150xi Controls and Installation 2-8