Controls and Installation, cont’d
Front
PC Computer
AUDIO | INPUT |
|
UNIVERSAL | INTERFACE W 150 xi |
H. | |
| RGB |
SHIFT | /ADSP |
| MIN/MAX |
Rear
SOGOUT | DDSP SERR SPARE | OUTPUT |
|
Power | Audio |
or 
MonitorProjector
Figure 2-13 — RGB 150xi installation
2.Connect the interface cable marked “Video input” to the computer’s video output (where the monitor was originally connected).
3.For audio connections, refer to the following “Connecting Audio” section for important information concerning unbalanced and balanced audio. Connect audio input to the interface’s front panel audio input jack. Connect audio output to the captive screw connector on the interface’s rear panel.
4.Use BNC cables to attach the interface to a projector or other display device.
R | G | B | RGsB – If coax cables are connected and | |
terminated (75 ohms) to the red, green, and | ||||
H | V | S | ||
blue channels only, and the SOG OUT switch | ||||
RGsB |
| |||
| is set to on (see page | |||
|
|
| sync on green. | |
R | G | B | RGBS – If the S (composite sync) cable is | |
H | V | S | ||
connected, the output will be composite sync. | ||||
|
|
| ||
RGBS
R
G
B
H
V 
S
RGBHV
RGBHV – If both the H & V cables are connected, the sync output is separate horizontal and vertical.
