Extron electronic 134xi, 150xi user manual RGB 130xi rear panel features

RGB 130xi rear panel features

100-240 0.5A MAX.

GAIN/

PEAK

100%

UNITY

50%

50/60 Hz

SOG DDSP SERR SPARE

R G B

HVS

OUTPUT

1 2 3 4 5

Figure 2-4 — RGB 130xi rear panel

1AC power input — standard IEC AC power connector (100 - 240VAC 50/60 Hz)

23-position gain/peak switch — unity*; gain with 50% peaking; and gain with 100% peaking

3DIP switches — 4 switches to control sync on green on output, Digital Display Sync Processing, serration pulse, and 75-ohm input termination (refer to the section “Setting the DIP switches”)

4

5

BNC output — 6 BNC connectors to output RGsB, RGBS, and RGBHV

Stereo audio output — 3.5 mm captive screw audio connector

*Unity sets the output level equivalent to the input, with no added peaking.

If the signal cable between the interface and the

display device is shorter than approximately 125 feet, and the level/peak switch is set to a setting other than Unity, the image may be overcompensated. If the edges of the image seem to exceed their boundaries, or if thin lines and sharp edges look thick and fuzzy, try changing the gain/ peak setting.

RGB 130xi , 134xi , 150xi Controls and Installation 2-4