Extron electronic RGB 201 Rxi manual Rack mounting

Installation and Operation, cont’d

Use 2 mounting holes on opposite corners

False Front panel uses 2 front holes

LEVEL
	PEAK
BOOST		CENTERING
	CONTROL

RGB201Rxi

WITH

ADSPTM

(2) 4-40 x 3/16" Screws

Figure 2-5 — Rack mounting

3. Secure the interface to the rack shelf with the two provided 4-40 x 1/8" machine screws. Insert the screws from the underside of the shelf, and securely fasten them through diagonally opposite corners as shown in the illustration above.

4. Fasten the false front panel (provided with the rack shelf) to the unoccupied side of the rack (as shown above), or install a second half-rack-width device in that side by repeating steps 1 through 3.

5. Secure the rack shelf to the rack using four 10-32 x 3/4" bolts. Insert the bolts through #10 beveled washers, then through the holes in the rack ears.

2-10 RGB 201 Rxi Universal Interface • Installation and Operation