Basic Operation
Playback
Backup
Use the FILE LIST
NOTE: The system is compatible with most major brands of USB flash drives, with capacities from 256 MB to 4 GB.
To backup recorded data:
1.Connect a blank USB flash drive to the top USB port on the front panel of the system.
2.Open the FILE LIST menu and search for recorded data on the system as shown above.
3.Select the file you want to backup and click the “BACKUP” box next to the
file name. Select | multiple files if desired. Click ALL to select all files; | click | |||
OTHER to deselect all files. NOTE: The size of each | file is | shown in | the File | ||
List menu. Use this to help you find a USB flash drive | large | enough | to | hold | |
all the files you | wish to backup. |
|
|
|
|
4.Click BACKUP from the
5.When the space in backup device is less than recording file, the system will prompt “Space not enough”...
6.You can remove USB device directly when backup is finished
USB Backup
Warning!. Do not remove the
USB drive during backup.
HDD Management
Hard Drive and USB Options:
The HDD screen displays essential information about the system`s internal hard drive, and lets you format the internal HDD and external USB flash drive (not included). If there is no hard drive in DVR, or the DVR cannot read the hard drive, or the hard drive is not formatted, it will display a red “H” in the video preview interface. To access this menu, from the MAIN MENU click DEVICES then HDD.
The HDD menu displays the following:
1.HDD STATUS: The system will display “OK” for normal operation
2.HDD SIZE: The size (in gigabytes) of the internal hard disk drive. The size of your system`s internal hard drive will vary by model
3.FREE SPACE: The space (in gigabytes) remaining on the system`s internal
HDD
4.AVAILABLE TIME: The recording time (in hours) remaining on the HDD based on your current record settings
5.OVERWRITE: Select ENABLE or DISABLE. If Overwrite is enabled, the system will record over the oldest video data once the HDD is full. If Overwrite is disabled, the system will stop recording once the HDD
is full and the “FULL” LED on the front panel of the system will light up.
6.USB STATUS: The system will display “OK” for normal operation
7.USB SIZE: The size (in gigabytes) of the USB drive attached.
8.FREE SPACE: The space (in gigabytes) remaining on the USB drive.
Formatting the Internal Hard Drive
If you installed a new hard drive, you must format the hard drive in the DVR before it can be used. Clicking on the HDD FORMAT button will begin the formatting process. After for- matting, the system will restart. ATTENTION: Formatting the
internal HDD erases all video data. This step cannot be Undone.
Backup Menu & Warning Notice
Backup Successful Notice
HDD Management
Hard Drive Format Warning
Page 21
