REMOTE Access

Network Setup

Next configure DDNS settings in the DVR

From the Network Setup menu, enter Primary or Secondary DNS from the WAN settings of your router in the DNS field

1. Click DDNS SETTINGS.

2. Under DDNS, select ON.

3. Under SERVICE, select DYNDNS if you obtained your domain name from DynDNS.com.

4. Under DOMAIN NAME, enter your DDNS domain name you received from the confirmation email. For example, if your domain name is adam@ dyndns.com, you need to enter adam@dyndns.com, in the text field using the Virtual Keyboard.

5. Enter your DDNS user name and password in the respective fields.

6. Click APPLY. Click OK in the confirmation window.

7. Click EXIT. The system will prompt you that it must restart. Click OK.

Port Forwarding

DDNS Setup

Port Forwarding allows computers and devices outside of your network to communicate with the DVR. You will need to forward ports 80, 100 and 9000 from the attached router to the IP address of the DVR. Gather the make, model and IP address of the router. If you changed the default router login, then you will need to know the user name and password for that router. Follow these steps:

Step 1: How to Determine the IP Address of the DVR

NOTE! The DVR and PC must be connected to the same router and both must be powered up before proceeding.

1.Select DHCP from the TYPE drop down box in the NETWORK SETUP Menu. You should see the message “Getting IP...” The router will assign an IP address.

2.Restart the DVR.

3.Once the DVR has restarted, reopen the Network Setup window and the IP address of the DVR will now be listed. This is the address to which you will forward ports 80 and 9000. If you plan to access your DVR via a smartphone, you will need to forward port 100 as well. Be sure to configure the Mobile Network screen of this DVR with port 100. See Mobile Phone Setup in this manual for details.

Step 2: Configure your Router for Port Forwarding

NOTE: Although all routers are different, the following is the basic information that needs to be configured. Consult your Router Manual for details on Port Forwarding configuration for your specific router. Some Internet Service Providers (ISP) may block access to these settings in the router they provide. You may need to contact your ISP to make these changes for you.

1.Access your routers’s Port Forwarding screen (See image at right). Your’s may be slightly different but the information required is the same.

2.Enter your port forwarding information for each port you want to forward. As noted above you will need to forward ports 80, 100 and 9000.

Assign a name

Start Port: 80; End Port: 80

Enter your DVR IP address you obtained from “Step 1: How to Determine the IP Address of the DVR”

Click Apply and repeat for the remaining ports.

Network Setup-Getting IP Address

Port Forwarding Screen from Router

Port Forwarding Naming Tip

For clarity and easier identification of ports in your router we suggest naming the ports as follows: Port 80 is for your Web Browser - name this port “DVR-Web”. Port 9000 is for streaming media - name this port “DVR-Media”. Port 100 is for your mobile phone - name this port “DVR-Mobile”.

Page 30

Page 30
Image 30
First Alert PRO-D1610 user manual Port Forwarding Naming Tip, Next configure Ddns settings in the DVR