Firstech, LLC CM4200, CM3 SERIES, CM1000A manual Connector

Models: CM4200 CM1000A CM3 SERIES

1 80
Download 80 pages 2.5 Kb
Page 35
Image 35

CONNECTOR 2

Pin 1 Green/White- Parking light 250mA (-) negative output. This is an optional output that will provide a (-) negative output with parking light flash.

Pin 2 Red/Black- 2nd Starter 250mA (-) negative output. This is an optional output that will provide a (-) negative output during crank only.

Pin 3 Violet- 250mA (-) negative output when locked and remote started. This wire will provide a (-) negative output when system is locked and armed and during remote start for anti-grind. (Note: This wire can also be used to trigger after-market L.E.D. kits and other after-market accessories. Output must be diode isolated when used to trigger after-market accessories.)

Pin 4 Black- Status 250mA (-) negative output. This is an optional output that will provide a (-) negative output before the ignition is triggered, during remote start and will shut down after ignition has shut down. (Note: This wire can be used to trigger factory security interface modules)

Pin 5 Orange- Factory alarm re-arm 250mA (-) negative output. This is an optional output that will provide a (-) negative pulse output during lock, after crank and after ignition shut down.

Pin 6 Orange/White- Factory alarm disarm 250mA (-) negative output. This is an optional output that will provide a (-) negative pulse output during unlock and before ignition is turned on.

Pin 7 White- Horn honk 250mA (-) negative output. This is an optional output that will provide a (-) negative pulse when the door locks are activated and 30 or 60 second pulse output during panic.

CONNECTOR 3

Pin 1 Light Blue- Parking brake (-) negative input. This input is required for manual transmission reservation mode and to trigger the turbo-timer mode. The proper wire will provide a (-) negative trigger only when parking brake is set. (Note: Turbo mode is optional.)

Pin 2 Gray/Black- Hood-pin (-) negative input. This input is a safety shut down that will prevent the vehicle from remote starting and shut down the engine when the hood is opened. (Note: This wire will also trigger the alarm when the system is armed.)

- 35 -

Page 35
Image 35
Firstech, LLC CM4200, CM3 SERIES, CM1000A manual Connector