![](/images/new-backgrounds/1133529/13352995x1.webp)
3.Wait a few seconds, and the parking lights will flash the number of times corresponding to the option number you are about to modify. If the number of times the lights flash does not correspond with the option you want to change, wait a few seconds and the siren/horn will sound, signaling that you have exited programming mode. After the siren/horn sounds, you can retry the process from the beginning.
4.Immediately after the parking lights stop flashing from step 3, press:
a.Button ( I ) for the factory default setting. The parking lights will flash once.
b.Button ( II ) for the optional setting. The parking lights will flash twice.
You will need to perform these steps for each option you would like to change.
2WSSR
The 2WSSR programs options just like the other
CM3 Series Option Programmer
The Option Programmer is an installer’s tool used to modify options within the CompuStar System. This unit plugs into the CompuStar system through the antenna cable and is powered through this cable as well, therefore requiring no batteries to replace. The Option Programmer makes it easier to program options available to remote programming and also makes available some options that the remotes are unable to modify. The Option Programmer has its own user’s guide in the “Accessory Manuals” section.
Resetting all of Menu #1 or Menu #2
to the factory default settings.
If you are not sure about current programming, you can change everything to the factory settings and start again.
- 48 -