Non-heater wire operation:

 

Invasive Mode: Airway temperature < 29.5 °C causes an audible

 

and visible alarm.

 

Non-invasive Mode: Airway temperature < 26.0 °C causes an

 

audible and visible alarm.

Sound Pressure Level:

Alarms exceed 50 dBA @ 1 m.

3.4Performance

Invasive Mode:

Flow up to 60 LPM, humidity output >33 mg/L

Non-Invasive Mode:

Flow up to 120 LPM, humidity output >10 mg/L

 

NOTE: Performance results with RT100 breathing circuit

Maximum System

20 kPa, gas leakage at max. pressure <100 mL/minute.

Operating Pressure:

 

Warm-up time:

Less than 30 minutes.

Recommended ambient

18 to 26 °C

temperature range:

 

CAUTION: If operating outside the recommended ambient temperature range, consult your local Fisher & Paykel Healthcare representative or refer section 4.1.5.

3.5Transport and Storage Environmental Conditions

Transport Conditions:

-10 to +50 °C

Storage Conditions:

-10 to +50 °C

3.6Standards and Approvals

AS/NZS 3200.1.0, CAN/CSA 22.2 No.601.1, UL 60601-1, IEC 60601-1, EN 60601-1

MR850 Technical Manual * Revision J * Issued November 2005 * Ref. 185041340 (185041713 internal)

11