US CA
28Using your ice maker (Ice & Water models only)
Ice On/Off
Your ice maker is designed to automatically dispense ice until it senses that the bin is full. So the more ice you use, the more it makes. It is even clever enough to sense when there is no bin in place to catch the ice and it will not dispense any ice.
First use
■■When you first turn your refrigerator on after installation, the
ice maker will be off. The light above the ICE ON/OFF icon will be off.
■■To turn your ice maker on press the 
button. The light above the ICE ON/OFF icon will be illuminated when the ice maker is on.
■■Press and hold 
, 
and 
together for 4 seconds then close the door(s). The ice tray will flip. Force another cycle. The ice tray will flip and spill the water into the ice bin. Empty water and replace bin.
■■If the bin is full of ice, inserted incorrectly or if all bins are removed, the ice maker will not operate. When the bin is inserted correctly the scoop will be on the right hand side of the bin for models RF135B, E522B, RF170W and RF170A and at the front of the bin for RF201A models (refer to Fig.24).
■■Once your ice maker is in operation, discard the first 3 harvests of ice (8 ice cubes are produced per harvest). This will flush away any impurities in the water line and ensure that you get the best quality ice. We recommend that you also do this after vacations or extended periods of not using ice.
■■We recommend that you turn the ice maker off if:
–The water supply is to be off for several hours, or
–The ice storage bin is to be removed for a period of time, or
–You are going on holiday/vacation.
Fig.23 Turning ice maker on
RF135A, E522B, RF170A
and RF170W
RF201A
Fig.24 Ice storage bin and scoop in correct position
