Using your ice maker (Ice & Water models only)
Information about your ice maker
29US CA
■■Your automatic ice maker will produce approximately eight cubes of ice every 3 – 4 hours, depending on the freezer compartment temperature and the number of door openings.
■■When the ICE BOOST function is activated, ice production will increase up to 25% from standard ice making.
■■The ice cube tray will fill with water.
■■When cubes are frozen, they will be ejected from the ice tray into the ice storage bin.
■■Ice making will continue until the storage bin is full.
■■Ice making will resume once you start to use the stored ice.
■■Your Ice & Water product comes with a smaller ice bin inside the larger freezer bin. Attached to the ice storage bin is the hygienic scoop for the ice. This scoop provides hygienic access to the ice.
■■If a large amount of ice is required, remove an ice storage bin and allow ice to fall into the larger bin.
■■For maximum ice storage, level the stored cubes with the ice scoop.
■■If ice is not used often, old cubes will become cloudy, taste stale, will shrink and may stick together. Empty the ice storage bin periodically and wash in lukewarm water. Dry thoroughly and place back into the correct position.
Ice boost function
This function is designed to be used for times when you require more ice eg when you are having a party. The ICE BOOST function will increase ice production up to 30% from standard ice making and deactivate automatically after 24 hours.
■■When you first turn your ice maker on, the ICE BOOST function will be off.
■■To turn this function on, press the 
button. The light above the 
button will be illuminated when the ICE BOOST function is on.
■■The ICE BOOST function is paused once your ice bin is full.
■■To manually deactivate this feature press the 
button again. The light above the 
button will be off when the ICE BOOST function is off.
■■Activating the ICE BOOST function will automatically turn ice making on.
■■Deactivating ice making will automatically deactivate the ICE BOOST function.
Important!
■■Avoid contact with the moving parts of the ice maker ejector mechanism, and do not place your fingers on the automatic ice making mechanism while the refrigerator is in operation.
■■Do not use ice cubes that may have become discolored, usually with a
■■Ensure the ice maker is connected to the filter and to a drinkable water supply only.
■■Installation of the water connection to the ice maker must be completed by a qualified service technician or a qualified plumber (see installation instructions).
For manual ice making please refer to page 32.
