Fluke instruction manual Current Standby, Operating Notes, 5725A Operating Functions and Modes

							Operating Notes	3
							5725A Operating Functions and Modes
3-9.	Current Standby
NO OUTPUT							BOOST
							LIT
				OUTPUT	SENSE
CURRENT				V ΩA	V ΩA		μ
OUTPUT		VOLTAGE MODE	NO			WIDEBAND
		CURRENT MODE		HI		HI
HI			OUTPUT
		5725A STANDBY
	11A			LO		LO
	MAX	FAULT
LO
		OVERLOAD
	2OV
	PK	CABLE OFF		HI
	MAX
				AUX	GUARD	GROUND	•
				CURRENT
							aq10i.eps

Figure 3-5. Current Standby Mode

Current standby mode is when both CURRENT MODE and 5725A STANDBY indicators are lit. In current standby mode, the 5725A is not supplying an output. Current standby occurs under any of the following conditions:

∙When the 5700A current output location is set to "5725A", and any ac or dc current level is showing on the 5700A Output Display with the STANDBY annunciator lit.

∙If "5725A" is selected in a 5700A setup menu as the current amplifier, and any of the following conditions are true:

1.An ac or dc current 2.2A or above is showing on the 5700A Output Display with the STANDBY annunciator lit.

2.Any level of dc current is showing on the 5700A Output Display with the STANDBY annunciator lit, and the BOOST key on the 5700A is pressed so that the BOOST indicator is lit.

3.An ac current 1A or above is showing on the 5700A Output Display with the STANDBY annunciator lit, and the BOOST key on the 5700A is pressed so that the BOOST indicator is lit.

4.The 5700A is ranged locked on the 11A range, and any dc current or an ac current 1A or above is showing on the Output Display with the STANDBY annunciator lit.

3-11