VR800 Quick Operation Guide |
|
Table of Contents |
|
Recording media | 4 |
Using an | 4 |
Notes on handling a | 4 |
Installing an | 5 |
Using a SCSI drive | 6 |
Notes on handling SCSI drive and disk | 6 |
Connecting a SCSI drive to the VR800 | 6 |
Note on connection | 7 |
Formatting (initializing) a disk | 8 |
Checking available recording time on a formatted disk | 11 |
Checking the record mode of the formatted disk | 11 |
Formatting the disk again | 11 |
Ejecting a removable disk from the SCSI drive | 12 |
Before turning off the power to the VR800 | 12 |
Turning on the power again with a removable disk loaded in the SCSI drive | 12 |
Notes on using two current drive | 13 |
Connecting a mixer | 14 |
Connecting a digital mixer equipped with adat I/O | 14 |
Notes for using a digital mixer | 14 |
About changing the | 15 |
Connecting an analog mixing console | 15 |
Basic recording | 16 |
Initial settings | 16 |
About sampling frequency | 16 |
Basic recording procedure | 17 |
Undo and redo recording | 18 |
Multitrack recording using overdubbing | 19 |
19 | |
Mixdown | 20 |
Recording in a new program | 20 |
Basic Locate function | 21 |
Playback using the | 22 |
Owner’s manual reference pages | 23 |
Notes on operating the VR800 |
|
<Recording media>
The VR800 is not equipped with recording media for recording and playback. Please read the section from page 4 to prepare the recording media to record, playback, and edit data on the VR800. For more information on a recording media supported by the VR800, refer to the “List of the drives with operation guaranteed” in the main Owner’s Manual.
<Damages>
Fostex is not responsible for any direct or consequential damages caused by operating the VR800 and/ or a connected
<Copyrights>
It is prohibited by law to use materials recorded on the VR800 from music CDs and/ or video tapes for which copyrights belong to a third party for commercial concerts, broadcasts, sales, and/ or distribution, except for your personal entertainment.
3
