![](/images/new-backgrounds/1189673/18967357x1.webp)
Chapter 2 Installation Instructions
IDE 2
1 | IDE 1 |
|
Front Panel Connector: F_P1
This motherboard includes one connector for connecting the front panel switch and LED indicators.
1
-
RESET
NC
+
-
PWR-SW
F_P1
Hard Disk LED Connector
The connector connects to the case’s IDE indicator LED indicating the activity status of IDE hard disk.
Reset Switch (RESET)
Attach the connector to the Reset switch on the front panel of the case; the system will restart when the switch is pressed.
Power LED Connector (PWR LED)
Attach the connector to the power LED on the front panel of the case. The Power LED indicates the power supply’s status. When the system is in S0 status, the LED is on. When the system is in S1 status, the LED is blink; When the system is in S3 or S5 status, the LED is off.
| 21 | |
661M03 Series User Manual | ||
|