Foxconn 661M03 Video Off Option Default Susp, Stby off, Video Off Method Default Dpms Supported

Models: 661M03

1 104
Download 104 pages 51.93 Kb
Page 60
Image 60

Chapter 3 BIOS Description

Video Off Option (Default: Susp, Stby - > off)

This option is used to set video off option. The setting values are Always On, Suspend -> off, Susp,Stby - > off, All Modes -> off.

Video Off Method (Default: DPMS Supported)

This option is used to define the video off method. “Blank Screen” mode means that after the computer enters power saving mode, only the monitor will close, however, the vertical and horizontal scanning movement of the screen continues. When you select the “V/H SYNC + Blank” mode the vertical and horizontal scanning movement of screen stops when the computer enters power saving mode. “DPMS Supported” mode is a new screen power management system, and it needs to be supported by the monitor you’re using.

Switch Function (Default: Break/Wake)

This option is used to enable or disable switch function to wake up. The setting values are Break/Wake and disabled.

MODEM Use IRQ (Default: AUTO)

This option is used to set the IRQ in which the MODEM can use. The system will automatically wake up when the Modem receives an incoming call.

Hot Key Function As (Default: Power Off)

This option is used to define the hot key function. The available setting values are Disabled, Power off, Suspend.

HDD Off After (Default: Disabled)

This option is used to define the continuous HDD idle time before the HDD enters power saving mode. The setting values are Disabled and 1 Min -15 Min.

Power Button Override (Default: Instant Off)

This option is used to set the power down method. This function is only valid for systems using an ATX power supply.

When “Instant Off” is selected, press the power switch to immediately turn off power. When “Delay 4 Sec” is selected, press and hold the power button for four seconds to turn off power.

PM Wake Up Events

Press enter to set the items of PM wake up Events. Please refer to page 53.

Delay Prior to Thermal (Default: None)

This option is used to set the delay time before the CPU enters auto thermal mode.The setting values are None, 1Min, 2 Min, 4 Min, 8 Min, 16 Min, 32 Min, 64 Min.

52

661M03 Series User Manual

 

Page 60
Image 60
Foxconn 661M03 Video Off Option Default Susp, Stby off, Video Off Method Default Dpms Supported, PM Wake Up Events