Foxconn 661M03 PHY optional, ATX 12V connector, AGP slot, CPU socket, North Bridge controller

Chapter 1 Product Introduction

11394 PHY (optional)

The RTL8801B is IEEE 1394a 100/200/400 Mbps 2-Port Cable Transceiver/ Arbiter (PHY) Chip. Provides two fully compliant cable ports at 100/200/400 Mbps.

2ATX 12V connector

This power connector connects the 4-pin 12V plug from the ATX 12V power supply.

3AGP slot

This Accelerated Graphics Port (AGP) slot supports 1.5V AGP 8X/4X mode graphics cards for 3D graphical applications.

4CPU socket

A 478-pin surface mount, Zero Insertion Force (ZIF) Socket for the Intel® Pentium® 4 processor, with 800/533/400MHz system bus that allows 6.4GB/s/4.2GB/s and 3.2GB/s data transfer rates, respectively.

5North Bridge controller

The SiS 661FX controller integrates a high performance host interface for the Intel® Pentium® 4 processor, a DDR memory controller, a high performance graphics engine (integrated graphics), and SiS MuTIOL te- chnology.

6DDR DIMM sockets

These two 184-pin DIMM sockets support up to 2GB system memory using unbuffered non-ECC PC 3200/PC 2700/PC 2100 DDR DIMMs.

7ATX power connector

This 20-pin connector connects to an ATX power supply. The power supply must have at least 1A on the +5V standby lead (+5VSB).

8Super I/O controller

The Low Pin Count (LPC) interface provides the commonly used Supper I/O functionality. The chipset supports a high-performance floppy disk controller for a 360K/720K/1.44M/2.88M floppy disk drive, a multi-mode parallel port, two serial ports and a Flash ROM interface.

6 661M03 Series User Manual