Foxconn 661M03 user manual IRQ 3-7,9-15, NMI Default Enabled, IRQ 8 Break Suspend Default Disabled

Chapter 3 BIOS Description

PM Wake Up Events Menu

IRQ [3-7,9-15], NMI (Default: Enabled)

This option is used to enable or disable IRQ[3-7,9-15], NMI.

IRQ 8 Break Suspend (Default: Disabled)

This option is used to enable or disable IRQ8 break suspend.

RING Power Up Control (Default: Enabled)

If this option is enable, it allows the system to resume from a software power down or power saving mode whenever there is an incoming call to an in- stalled fax/modem. This function needs to be supported by the relevant hard- ware and software. The setting values are Disabled and Enabled.

MACPME Power Up Control (Default: Enabled)

This option is used to enable or disable the system to be waken up by onboard LAN.

PCIPME Power Up Control (Default: Enabled)

This option is used to enable or disable the system to be waken up by PCI card.

PS2KB Wakeup from S3 (Default: Hot Key)

This option is used to set which action will wake up PS/2 keyboard from S3 status. The setting values are Any Key, Hot Key, Password.

PS2MS Wakeup from S3 (Default: Click)

This option is used to set which action will wake up PS/2 mouse from S3 status. The setting values are Disabled, Click, Move & Click.

Power Up by Alarm (Default: Disabled)

This option is used to set the timing of the start-up function. In order to use this function, the start-up password function must be canceled. Also, the PC power source must not be turned off. The setting values are Disabled and Enabled.

	53
661M03 Series User Manual